Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Marietta, GA
A chimney sweep and inspection in Marietta typically runs $189-$289 for a standard NFPA 211 Level 2 cleaning with camera documentation, with most jobs booked within 48 hours during shoulder seasons. Emberly Chimney Cleaners has completed more than 38,000 inspections since 2009, every one with a written price before work starts and a photo record when it’s done. In Marietta, we’re dealing with two very different chimneys: century-old masonry stacks around the Square built for coal, and 1990s East Cobb fireplaces retrofitted with gas logs that never got proper liners. Call (678) 679-0171 for a free estimate.
Why Marietta Homes Are Different
Marietta sits at roughly 1,100 feet on the Piedmont plateau, which gives it 5-10 more frost days per year than downtown Atlanta and occasional ice storms that send homeowners scrambling to light fires after months of dormancy. That feast-or-famine burn cycle deposits the heaviest, gummiest creosote because flues never sustain the 250°F+ temperatures needed for clean combustion during Georgia’s brief cold snaps.
The housing stock splits sharply. Around Marietta Square and the surrounding historic streets, you’ll find late-1800s to 1940s two-story frame and brick homes with original masonry chimneys, some still carrying multi-flue stacks that once served coal grates. East Cobb’s 1980s-2000s subdivisions, ZIP codes 30062 and 30068, are dominated by large brick colonials and Georgians with decorative fireplaces that were never the primary heat source and often shipped with undersized clay-tile liners. High summer humidity traps moisture in those flues year-round, accelerating mortar and liner deterioration between burning seasons.
In East Cobb’s 1990s subdivisions, we regularly find gas-log sets retrofitted into original wood-burning fireplaces with the factory damper partially blocked or left closed. That’s a local code headache, and it traps flue condensation that corrodes the firebox floor and lower liner before the homeowner notices any problem.
Our Main Marietta Services
Most Marietta homeowners call us for these three services, each with its own dedicated local page.
Chimney Sweep in Marietta
Our NFPA 211 Level 2 sweep includes a camera scan down the flue, creosote removal, and a documented photo record under Haven Standard Clause 4. In Marietta, we pay special attention to stage-2 creosote buildup from intermittent fires and moisture damage from humid summers. Chimney Sweep in Marietta
Chimney Repair in Marietta
We handle crown cracks, spalling brick, and deteriorated mortar in historic masonry near the Square, plus flue damage and water intrusion in East Cobb’s newer construction. Every repair starts with a camera inspection and a written scope before any work begins. Chimney Repair in Marietta
Fireplace Services in Marietta
Gas-log retrofits, damper adjustments, and firebox repairs are common here given the number of East Cobb conversions done without proper venting updates. We inspect the full smoke chamber and flue connection on every call. Fireplace Services in Marietta
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Cap & Crown in Marietta
Marietta’s split housing stock creates distinct cap and crown problems. Around the Square, century-old crowns were poured with primitive concrete mixes that spall and crack after decades of freeze-thaw cycling at this elevation. In East Cobb, we see too many builder-grade crowns installed without proper overhang or drip edges, and decorative flue tops left open to driving rain that saturates the chimney interior all summer. Chimney Cap & Crown work is where most Marietta water damage starts.
Crown Repair
Signs you need it
Hairline cracks widening after winter, concrete chunks missing from the top surface, or water pooling on the crown instead of shedding to the edges.
What it costs in Marietta
Crown repair in Marietta typically runs $450-$950 depending on crack depth and whether the wash needs complete re-pouring.
How we do it
We grind out cracks to solid substrate, apply a bonding agent, and pour a new Portland-based crown with proper slope and overhang, then document the finished surface under Haven Standard Clause 4.
Cap Installation
Signs you need it
Rust streaks down the chimney face, birds or squirrels nesting in the flue, or rain dripping onto the firebox floor during summer storms.
What it costs in Marietta
Single-flue cap installation in Marietta ranges from $285-$595; multi-flue caps or custom sizes run $650-$1,200.
How we do it
We measure the flue or crown footprint, fabricate from Gelco or Olympia Chimney galvanized or stainless stock, and secure with masonry anchors rated for wind uplift in this area.
What Chimney Cap & Crown Costs in Marietta
| Item | Typical range in Marietta |
|---|---|
| Crown repair (minor cracks) | $450-$650 |
| Crown re-pour (full rebuild) | $850-$1,400 |
| Single-flue cap (installed) | $285-$595 |
| Multi-flue cap (installed) | $650-$1,200 |
| Crown coating (sealer system) | $350-$550 |
Can a cracked crown wait until next season?
Small hairline cracks can be sealed if caught early, but once water penetrates the crown body, freeze-thaw damage accelerates through Marietta’s 5-10 extra frost days and the repair cost doubles. Call (678) 679-0171 for a camera inspection and written quote.
Do I need a cap if I don’t use my fireplace?
Yes, an open flue admits rain, humidity, and animals year-round, and in Marietta’s humid summers that moisture degrades the liner and smoke chamber even without fires. Caps pay for themselves in prevented damage.
Chimney Liner & Rebuild in Marietta
Marietta’s vintage chimneys around the Square were often built unlined or with single wythes of clay tile that can’t handle modern gas or oil exhaust temperatures. In East Cobb, we find 1990s tract homes with cheaply installed clay liners already cracked from thermal shock, especially where gas-log retrofits vent into flues never sized for them. Chimney Liner & Rebuild is often the only safe fix.
Stainless Steel Liner
Signs you need it
Clay tile chunks in the firebox, condensation stains on interior walls near the chimney, or a home inspection flagging an unlined flue in a pre-1950 Marietta home.
What it costs in Marietta
Stainless steel liner installation in Marietta ranges from $2,800-$4,500 for a single-flue system, including insulation and top connection.
How we do it
We run a camera to map the flue, drop a DuraFlex or HeatShield-compatible stainless tube with proper insulation wrap, and seal the top with a plate and cap assembly rated for the appliance type.
Partial Rebuild
Signs you need it
Spalled brick above the roofline, a leaning stack, or mortar so degraded that light shows through the chimney wall in the attic.
What it costs in Marietta
Partial rebuilds from the roof up in Marietta typically run $3,200-$6,500 depending on brick matching and scaffold access.
How we do it
We dismantle to sound masonry, salvage matching brick where possible, rebuild with proper bond and weep details, and install a new crown and cap before documenting the completed structure.
What Chimney Liner & Rebuild Costs in Marietta
| Item | Typical range in Marietta |
|---|---|
| Stainless steel liner (single flue) | $2,800-$4,500 |
| Flexible liner (offset flue) | $3,200-$5,200 |
| Liner replacement (remove and reline) | $3,500-$5,800 |
| Partial rebuild (roof up) | $3,200-$6,500 |
| Full chimney rebuild | $8,500-$15,000 |
Does my 1920s Marietta chimney need a full rebuild or just a liner?
Most Square-area chimneys need both: the exterior masonry often requires partial rebuild above the roofline, while the flue needs stainless steel lining to meet modern code. We camera-inspect and quote each component separately so you see exactly what you’re paying for.
Can I keep using my fireplace with a cracked clay liner?
No, cracked clay liners allow exhaust gases and creosote to penetrate the masonry wall, creating both fire risk and carbon monoxide exposure. We won’t clear a system for use until the liner integrity is verified or replaced. Call (678) 679-0171 for a free second opinion on any other estimate.
Brands We Service in Marietta
We stock caps, liners, and repair materials from HeatShield, Gelco, Olympia Chimney, and Famco through Haven’s buying network, with most parts available for next-day installation. our brands
Pricing for Chimney Cleaning in Marietta, GA
| Service | Typical range in Marietta |
|---|---|
| NFPA 211 Level 2 sweep & inspection | $189-$289 |
| Heavy creosote removal (Class III) | $350-$550 |
| Smoke chamber parge coating | $650-$1,100 |
| Firebox floor repair (minor) | $450-$850 |
| Firebox rebuild (partial) | $1,800-$3,200 |
| Single-flue cap installation | $285-$595 |
| Crown repair (minor) | $450-$650 |
| Crown re-pour (full) | $850-$1,400 |
| Stainless steel liner (single flue) | $2,800-$4,500 |
| Partial chimney rebuild | $3,200-$6,500 |
Prices push higher in Marietta when we need to match historic brick, work around steep East Cobb rooflines, or remove heavy stage-2 creosote from chronically under-fired systems. Every job gets a written price before work starts under Haven Standard Clause 1, with no exceptions.
Neighborhoods We Serve in Marietta
We dispatch crews throughout Marietta from our Atlanta coordination office, with scheduling typically available within 2-3 business days during non-peak periods and 5-7 days after the first ice storm of the season.
- Marietta Square (historic district, pre-WWII masonry)
- East Cobb / 30062, 30068 (1980s-2000s subdivisions)
- Whitlock Heights
- Indian Hills
- West Cobb near Kennesaw border
Service Area - Cities Near Marietta
Emberly Chimney Cleaners serves the full metro corridor north and west of Atlanta. If you’re outside Marietta city limits, we also work in Kennesaw, GA, Woodstock, GA, Roswell, GA, and Holly Springs, GA. Scheduling and dispatch are coordinated from our Atlanta office, with crews assigned to your area.
Serving Marietta, GA - Our Local Coverage Area
We’re based in the Marietta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Marietta
Standard bookings run 2-3 business days in shoulder seasons; after the first winter ice storm, East Cobb and Square-area appointments typically stretch to 5-7 days. We answer calls live 24/7 and can place you on our cancellation list for earlier openings.
Cobb County generally requires permits for structural chimney rebuilds and new liner installations, but not for routine sweeping or cap replacement. We pull permits as needed and include that coordination in our written scope, so you don’t visit the county office.
Most East Cobb HOAs require advance notice for scaffolding or masonry work but don’t restrict the work itself. We provide written scope and insurance documentation for HOA submission upon request, and we’ve worked in most major subdivisions without issue.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Marietta Customers Say
"Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V."They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A.