Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Liner & Rebuild in Alpharetta: What to Know First
We provide independent Olympia Chimney chimney liner & rebuild service across Alpharetta, with most liner replacements and partial rebuilds scheduled within a week of your call and full rebuilds quoted with a written start date you can plan around. Every job begins with an NFPA 211 Level 2 camera inspection, and you’ll get a written price, written scope, and written warranty before any work starts - no exceptions, no surprises. This page is for Alpharetta homeowners who already know they own an Olympia Chimney system and need straight answers on what’s failing, what it costs, and who can fix it without voiding whatever warranty coverage remains. Call (678) 679-0171 when you’re ready to see what the camera finds.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney ProFlex 316Ti flexible liners develop circumferential cracking at the flex points where Alpharetta’s clay-heavy soil settles seasonally, especially in homes built 2015-2019 off Windward Parkway and near Avalon. The 316Ti alloy resists acid corrosion but fatigues at stress concentrators; we cut back to sound metal and splice in a matching ProFlex section or transition to DuraFlex UL 1777 where the original run is too compromised to warranty.
- Olympia Chimney rigid 304 stainless elbows in two-story Alpharetta builds collect acidic condensate at the offset joints because the original installers rarely pitched them correctly for our humid shoulder seasons. The result is pinhole weeping that stains the exterior masonry. We pull the offset, re-pitch to NFPA 211 slope requirements, and replace with Gelco rigid or a custom-fabbed Olympia-compatible elbow from our Haven buying network.
- Olympia Chimney smooth-wall round liners (the 4″-8″ residential range) separate at the collar joints after 8-12 years when subjected to pellet appliance venting cycles - common in Alpharetta’s newer infill neighborhoods where homeowners added pellet inserts to builder-grade fireplaces. The thermal expansion differential loosens the mechanical joint; we re-secure with proper expansion hardware and smoke-test to 15 Pa, or upsize to a compatible HeatShield Cerfractory foam reline where the flue is too tight for a full liner pull.
- Olympia Chimney terra-cotta flue tile systems in 1980s-1990s Alpharetta ranch homes spall and flake at the smoke chamber throat, a failure mode most sweeps misdiagnose as simple creosote buildup. The camera shows the difference: spalling produces sharp, irregular fragments where glaze cracking shows smooth thermal stress patterns. We document with photos under Haven Standard Clause 4, then rebuild the smoke chamber with Chamber-Tech 2000 and install an Olympia-compatible stainless liner to protect the new masonry.
- Olympia Chimney top-mount damper/liner cap assemblies seize in the open position after our pollen seasons coat the cast-aluminum throat with sticky residue that hardens through summer heat. Owners smell draft issues in fall. We disassemble, clean the throat to bare metal, lubricate with high-temp graphite, and replace the gasket with OEM or Famco equivalent - never generic hardware-store seals that’ll cook off by January.
Our Olympia Chimney Chimney Liner & Rebuild Process
- 1
Call and schedule. A live person answers, checks Olympia Chimney parts availability through our Haven buying network, and books your NFPA 211 Level 2 inspection. You’ll get a text when your tech is en route.
- 2
Camera inspection and documentation. We run the camera the full flue length, record footage, and photograph every finding. The camera doesn’t soften anything, and neither do I - Corrine Halstead reviews flagged footage personally when the finding is unusual.
- 3
Written diagnosis and price. Before any work starts, you receive a written scope with line-item pricing, parts specification (OEM Olympia Chimney or quality aftermarket with warranty implications noted), and our 365-Day Done Right Promise. Clause 1 of the Haven Standard requires this in writing; we don’t deviate.
- 4
Repair or rebuild. Background-checked, uniformed technicians complete the liner replacement or rebuild to manufacturer tolerances, using materials from Olympia Chimney, DuraFlex, HeatShield, Gelco, Famco, or Copperfield as specified. License number is on every work order.
- 5
Smoke test and photo record. We pressure-test or smoke-test per the repair type, then deliver your documented photo record under Haven Standard Clause 4 - the archive practice we’ve maintained since 2009.
- 6
Cleanup and warranty. We haul debris, protect your floors and landscaping, and leave a written warranty with clear terms. The 365-Day Done Right Promise covers labor and materials; call if anything doesn’t perform as specified.
BeforeAfterWhat Olympia Chimney Chimney Liner & Rebuild Costs in Alpharetta
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Olympia Chimney flexible liner replacement (single flue, standard height) | $2,800 - $4,200 | Flue length, number of offsets, access (steep roof, tight chase) |
| Olympia Chimney rigid liner replacement with custom elbows | $3,500 - $5,800 | Elbow count, insulation requirements, exterior chase modification |
| Partial chimney rebuild (crown, top 4-6 courses, liner reseat) | $4,500 - $7,500 | Brick matching, scaffolding needs, liner condition below the damage |
| Full chimney rebuild with new Olympia-compatible liner system | $12,000 - $18,000 | Height, footing condition, hearth extension requirements, permit complexity |
| Smoke chamber parging + liner repair (HeatShield Cerfractory) | $1,800 - $3,200 | Chamber accessibility, extent of spalling, liner joint accessibility |
Alpharetta’s permit requirements for full rebuilds add $200-$400 to the total; we pull permits and schedule inspections as part of the scope. Every estimate is free, and we honor our Free Second Opinion on any competitor’s written quote. Call (678) 679-0171 for your exact number.
Why Alpharetta Homeowners Call Emberly Chimney Cleaners Alpharetta for Olympia Chimney Work
We’ve run cameras down chimneys across Alpharetta since 2009 - including steady work off Webb Bridge Road near Wills Park - and we’ve learned which builder configurations fail and which parts actually fit when they do. As an independent Olympia Chimney service provider, we’re not bound to OEM-only solutions; we source through our Haven buying network to keep prices honest, whether that’s an exact ProFlex match or a DuraFlex, HeatShield, or Gelco alternative that performs better for your specific failure mode.
The 365-Day Done Right Promise is stamped on every job. Your tech is background-checked, uniformed, and named on your work order - not a rotating subcontractor. Calls are answered live, 24/7. And every visit, from inspection to rebuild, produces a documented photo record under Haven Standard Clause 4. We’ve completed more than 38,000 chimney inspections and cleanings this way. The number matters less than the consistency: written price before work starts, every time, no exceptions.
FAQs
Using non-OEM parts can void remaining warranty coverage on the liner itself, which is why we specify OEM versus quality aftermarket in your written quote and note the warranty implication for each option. We source Olympia Chimney parts through our Haven buying network when coverage preservation matters, and we’ll tell you honestly when an aftermarket alternative performs better at lower cost with acceptable trade-offs. Call (678) 679-0171 and we’ll review your warranty status before you decide.
Most flexible liner replacements in Alpharetta are completed in one day; rigid systems with custom elbows or full rebuilds typically run two to three days, including permit inspection scheduling where required. We don’t promise same-day dispatch, but we do commit to a written start date you can plan around. Call (678) 679-0171 to check current scheduling.
Localized damage - a cracked flex section, a separated collar, minor pitting at the termination - can often be repaired with OEM-compatible sections or HeatShield Cerfractory foam if the remaining liner passes NFPA 211 integrity standards. We determine this with the camera, show you the footage, and quote both repair and replacement scenarios in writing. Call (678) 679-0171 for a free inspection.
We stock common Olympia Chimney flex and rigid diameters through our Haven buying network, and we verify parts availability when you call to schedule. Uncommon sizes or custom rigid elbows may add 3-5 business days; we tell you before booking, not after arrival. Call (678) 679-0171 to confirm your part.
The camera decides this, not a guess from the hearth. Liner-only issues show as isolated cracks, joint separation, or acid pitting with sound surrounding masonry; rebuild territory means compromised structural courses, spalling through multiple flue walls, or footing deterioration. We show you both, explain the safety implications of each finding, and quote accordingly - no pressure, just the footage and the number. Call (678) 679-0171 to schedule your Level 2 inspection.
Written by Corrine Halstead, Owner, Emberly Chimney Cleaners Alpharetta at Emberly Chimney Cleaners Alpharetta, serving Alpharetta and nearby areas.