Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Alpharetta
Dryer vent cleaning in Alpharetta typically costs $149-$289 for a standard single-family home, with most jobs completed in 60-90 minutes and a written price agreed before we start. We’re familiar with the long, concealed vent runs that are standard in Alpharetta’s 1990s-2000s subdivisions, and we carry the rigid aluminum duct and pest-resistant terminations needed to fix them. Call (678) 679-0171 for a free estimate.
Our crews serve Alpharetta from our Atlanta office, and we know the difference between a short straight vent in a 1970s ranch and the 25-foot chase runs hidden behind garage walls in Windward, Crooked Creek, and the Manor Golf and Country Club neighborhoods. That local knowledge matters because the failure mode is different here, and the fix requires different material.
Why Emberly Chimney Cleaners Alpharetta Is Alpharetta’s Preferred Dryer Vent Cleaning Company
We’ve cleaned dryer vents in Alpharetta since our founding in 2009, and the pattern is consistent: homeowners in subdivisions off Windward Parkway, Old Milton Parkway, and Kimball Bridge Road call us after their dryer starts taking two cycles, and the problem is almost never the dryer itself. It’s the concealed duct run that builders routed through garage chases in the late 1990s and 2000s, often sharing wall space with the factory-built fireplace chase.
Our reviews from Alpharetta customers mention the same thing repeatedly: we show them the photo, we name the price before touching anything, and we explain why their vent failed in terms they can verify themselves. That transparency is Clause 1 of the Haven Standard, and it’s why our Dryer Vent Cleaning in Alpharetta schedule stays busy year-round.
Calls are answered by a live person, 24/7. We don’t use voicemail or web forms for booking. When you schedule, you get a named technician, a text when they’re en route, and a written scope with warranty before any work begins.
Our Dryer Vent Cleaning Services in Alpharetta
Full Dryer Vent Duct Cleaning with Lint Removal
We clean the entire run from the dryer transition duct to the exterior termination, using rotary brushes and high-velocity vacuums that pull lint out without pushing it deeper. In Alpharetta’s Windward and Crooked Creek subdivisions, that run is often 25-28 feet with two 90-degree turns inside a framed chase behind the garage wall. Lint accumulates at every turn, and because the chase is enclosed, there’s no visual warning until the dryer fails or the homeowner smells something hot.
We document the before condition with photos, clean the full run, and photo the clear duct. That record is yours, and it’s archived under Haven Standard Clause 4.
Dryer Vent Inspection and Airflow Testing
We test airflow at the dryer and at the exterior termination using a calibrated anemometer, and we inspect the duct with a borescope camera where accessible. The numbers tell the story: a properly venting dryer should move 1,500+ feet per minute at the termination. In Alpharetta homes with collapsed foil ducts or blocked soffit terminations, we routinely see readings under 400 fpm.
Because many Alpharetta homes have the dryer vent and factory-built fireplace sharing the same wall chase, we also check whether lint is blowing back into the prefab chase or whether the fireplace cap is missing or damaged. The two systems interact more than most homeowners realize.
Dryer Vent Termination and Cap Replacement
We replace builder-grade terminations with pest-resistant hoods that use a damper and screen, not a flimsy flapper that squirrels can pry open. In Alpharetta, where the warm season runs April through October, wildlife access is a real issue. We source terminations through Famco and Copperfield, procured through Haven’s buying network to keep pricing honest.
We also relocate terminations that dump into soffits or shared chases, which is a common defect in Alpharetta’s 1990s-2000s builds. The correct location is a dedicated wall penetration with proper clearance from windows, doors, and - critically - from the fireplace cap.
Transition Duct Replacement and Rigid Aluminum Upgrades
The flexible foil or vinyl transition duct behind your dryer is often the original builder-grade material, and in Alpharetta homes now 20-35 years old, that material has degraded. It sags, traps lint, and can collapse at the wall penetration. We replace it with rigid aluminum or UL-listed semi-rigid duct, properly supported, with no hidden runs inside walls or chases.
This upgrade is particularly important in Alpharetta because the long concealed run already restricts airflow. Adding a pinched transition duct on top of that creates a fire-load point that standard cleaning alone won’t fix.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Alpharetta
We stock replacement terminations, transition ducts, and pest-resistant caps from Gelco, Famco, and Copperfield, sourced through Haven’s buying network. For Alpharetta homeowners, that means no waiting for parts to ship. If your Windward home needs a new termination hood or your Crooked Creek laundry needs a rigid aluminum upgrade, we carry it on the truck and install it the same visit. Fast turnaround matters because a disconnected dryer vent is a fire hazard, and we don’t leave jobs half-finished.
Common Dryer Vent Cleaning Problems We See in Alpharetta Homes
- Concealed 25-foot-plus runs with multiple 90-degree turns. Alpharetta’s HOA subdivisions were built with first-floor laundries adjacent to attached garages, so the vent run travels through enclosed chases that code inspectors rarely access after drywall. Lint accumulates undetected at every turn, and homeowners assume the dryer is failing when the duct is the actual problem.
- Flexible foil or vinyl transition duct left from construction. This builder-grade material sags behind the dryer, traps lint in low spots, and often pinches where it penetrates the wall. It’s a fire-load point that rigid aluminum eliminates.
- Exterior terminations dumping into soffits or shared chases. When the dryer vent exits near the factory-built fireplace cap, lint can blow back into the prefab chase. Homeowners smell something and call for a chimney inspection, but the source is actually the dryer vent termination.
- Missing or damaged chimney caps letting wildlife into shared chases. Squirrels and raccoons nest in uncapped flues across north Fulton County, and their debris can block airflow in adjacent duct chases. Summer nests of chimney swifts, protected under federal law, can’t be removed until October, so we schedule cap installation after migration.
Pricing for Dryer Vent Cleaning in Alpharetta, GA
| Service | Typical Range in Alpharetta |
|---|---|
| Standard dryer vent cleaning (single-family, accessible termination) | $149 - $189 |
| Long-run cleaning (25+ feet, concealed chase, multiple turns) | $189 - $249 |
| Transition duct replacement with rigid aluminum | $75 - $125 |
| Termination/cap replacement with pest-resistant hood | $89 - $149 |
| Full package: cleaning + rigid upgrade + new termination | $249 - $289 |
What moves the price: length of run, number of turns, whether the duct is accessible or concealed, condition of the transition duct, and whether the termination needs relocation. We inspect first, show you what we found, and deliver a written price before any work starts. No exceptions. Estimates are free. Call (678) 679-0171.
We were called to a Windward home off Lake Windward Drive after the homeowner noticed the dryer needing two cycles; the vent run was a 28-foot concealed chase through the garage wall. Pulling the transition duct, we found the run routed through the same prefab chase framing the builder installed for the zero-clearance fireplace, and the flexible foil duct had collapsed at the second 90-degree turn. We replaced it with rigid aluminum, added a proper exterior termination with a pest-resistant hood, and showed the owner how the missing chimney cap on the factory-built flue had let squirrels nest above, which we scheduled for removal in October after swift migration.
We Also Serve Cities Near Alpharetta
Our Dryer Vent Cleaning crews work throughout north metro Atlanta, including Roswell, Duluth, Woodstock, and Holly Springs. The same long-run and shared-chase issues appear in these markets, though Alpharetta’s concentration of 1990s-2000s HOA subdivisions makes the problem particularly concentrated here.
Serving Alpharetta, GA - Our Local Coverage Area
We’re based in the Alpharetta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dryer Vent Cleaning in Alpharetta
Windward homes were built with 25-foot-plus concealed vent runs through garage chases, often with two 90-degree turns, while older Roswell homes typically have short straight runs of 8-12 feet. More turns and more length mean more lint accumulation, and the enclosed chase hides the problem until the dryer fails. If your Windward laundry is taking longer to dry, the duct is the likely culprit, not the appliance. Call (678) 679-0171 for a free inspection.
Yes, if the termination dumps into the same soffit or chase area. Lint can blow back into the prefab fireplace chase, creating odor and fire risk, and homeowners often mistake it for a chimney draft issue. We relocate terminations to dedicated wall penetrations with proper clearance from the fireplace cap. The fix is straightforward once scoped. Call (678) 679-0171 for an exact quote.
Check these three things: drying time (two cycles for a normal load is a red flag), exterior airflow (weak or no airflow at the termination hood), and lint behind the dryer or on the exterior wall. If all three are present, the duct is clogged regardless of the dryer’s age. We confirm with airflow testing and borescope inspection, then show you the photo evidence. Call (678) 679-0171 to schedule.
Dryer vent cleaning proceeds year-round. Chimney swift protections apply to active nests inside the flue, not to dryer ducts. However, if your dryer vent shares a chase with a factory-built fireplace that has an active swift nest, we may need to coordinate cap installation for October. We’ll scope both systems on arrival and tell you exactly what the timeline looks like. Call (678) 679-0171 to book.
No. Dryer vent inspection checks duct integrity, airflow, and termination condition. A chimney inspection, specifically NFPA 211 Level 2, involves a camera scan of the flue liner, smoke chamber, and firebox. Because many Alpharetta homes have the dryer vent and fireplace sharing a wall chase, we often recommend scoping both while we’re on site. Each inspection is priced separately, and we explain what each covers before you decide. Call (678) 679-0171 to discuss what’s right for your home.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners Alpharetta, serving Alpharetta since 2009.